UK cost guide

Fence Installation Cost UK 2026

Current UK supplied-and-installed garden fencing costs per metre for lap, close-board, slatted, composite and metal systems.

Last reviewed: 1 September 2026 · Sources & data · Methodology

Typical planning cost£70–£150 per metre for common timber systems
Broader project rangeAbout £1,000–£2,500 for many full-garden installations
Planning figures are estimates rather than quotations. Live calculators combine dated UK benchmarks with clearly separated modelling assumptions such as region, size, condition and specification.

Calculate this project

What affects the cost?

Fence installation cost depends on boundary length, panel type, post system, ground conditions, access and whether an existing fence must be removed. Current August 2026 pricing is best compared per linear metre because panels, posts, gravel boards, concrete and labour are usually bundled into the fitted rate.

  • Fence run length
  • Lap, close-board, slatted, composite or metal system
  • Timber or concrete post system
  • Ground condition and slope
  • Old fence removal
  • Access and waste disposal

Typical cost breakdown

Lap / overlap timber installed£70–£100 / m
Close-board / feather-edge installed£90–£130 / m
Slatted / lattice installed£100–£150 / m
Composite installed£130–£200 / m
Metal panels installed£120–£180 / m
Standard installation labour£40–£60 / panel
Typical full garden installation£1,000–£2,500

Regional planning examples

The examples below apply our published modelling factor to the same national benchmark. They are not claimed as observed city-wide average quotes.

London£90–£190 / m timber installed
Manchester£70–£140 / m timber installed
Birmingham£70–£150 / m timber installed
Glasgow£70–£140 / m timber installed
Cardiff£60–£140 / m timber installed

Sources used for this guide

Checkatrade

Fence Panel Installation Cost Breakdown

Published / checked: Page updated June 2025; pricing table last updated February 2025

Used for: Fence installation cost drivers and older benchmark cross-check only; current 2026 fitted-rate figures use the August 2026 MyBuilder source

View source ↗
MyBuilder

Fence Panel Cost Guide for 2026

Published / checked: 21 August 2026

Used for: Installed fencing benchmarks by type: lap £70–£100/m, close-board £90–£130/m, slatted £100–£150/m, composite £130–£200/m, metal £120–£180/m; standard labour £40–£60 per panel

View source ↗

Frequently asked questions

How much does garden fencing cost per metre in 2026?

Current UK guidance is around £70–£100 per metre for lap timber, £90–£130 for close-board, £100–£150 for slatted fencing and £130–£200 for composite, supplied and installed.

How much should I budget for a typical garden fence?

A current UK guide places many full-garden fence installations around £1,000–£2,500 all-in, depending on material, run length, posts and ground conditions.

How much is fencing labour per panel?

Current standard installation labour is around £40–£60 per panel before difficult ground, access or removal work.

Is old fence removal included?

Not always. Ask for removal of old panels, posts, concrete and waste disposal to be itemised separately when comparing quotes.

Related costs